Neutral Density Filtre
B+W 67MM GRAD ND 0.6-4X (502)
B+W 67mm ND 502 Graduated Neutral Density Filtre
· Graduated ND 0.6-4X (502) Filter
· Rotating Filter Mount
Description
Because it attenuates the light twice as much as the 501 Filter, i.e. by two aperture stops (it transmits 25% of the incoming light), this graduated filter already produces quite dramatic effects. Because of the increased difference in brightness, it is even more important for the horizon line not to be positioned too far from the center of the image.
Note: The (501) and (502) series of filters are supplied in a rotating mount, similar to that of a polarizer.
Mount
This filter uses our standard B+W rotating F-Pro filter mount, which has a front accessory thread and is made of brass. Compared to the earlier standard mount introduced in 2001, the F-Pro mount has become thinner. Now it can be used with wide angle lenses, including most 24mm focal lengths on a full frame body, without vignetting. Another advantage of the F-Pro mount is it’s modified retaining ring, which is no longer threaded in from the front, but holds the filter glass in place from the back. When removing a filter or lens hood that has been screwed on too tight to the filter, the retaining ring is not at risk of loosening.
Filter Coating
Uncoated Glass
Uncoated glass is usually found with special effects filters and acrylic filters, where coating is either an impossibility or would work against the effect the filter is trying to attain.
· Graduated ND 0.6-4X (502) Filter
· Rotating Filter Mount
Değerlendirmeler
Henüz değerlendirme yapılmadı.